Skip to content

Supported commands

173 dedicated parsers covering 251 command patterns. Anything not listed still parses through the generic engine (and through ntc-templates / Genie when installed).

Grammar: [optional], (a | b) alternatives, <param> single token, <param...> rest of line. Abbreviations are accepted everywhere (sh ip int br).

Platform Parsers Patterns Regression fixtures
Cisco IOS XR (iosxr) 68 105 99
Juniper Junos OS / Junos OS Evolved (junos) 52 64 71
Huawei VRP (NE/CX/AR/CE/S series) (vrp) 53 82 84

Cisco IOS XR (iosxr)

Command Normalized model Parser Description
admin show inventory inventory iosxr.show_inventory Hardware inventory (NAME/DESCR/PID/VID/SN).
admin show platform iosxr.show_platform Line cards, RPs, fans and PSUs with their state.
dir [<path...>] iosxr.dir Directory listing with totals.
show (ip \| ipv4) interface brief [vrf (all \| <vrf>)] [<interface>] interfaces.brief iosxr.show_ipv4_interface_brief IPv4 address, status and VRF of every interface.
show (ip \| ipv4) vrf (all \| <vrf>) interface brief interfaces.brief iosxr.show_ipv4_interface_brief IPv4 address, status and VRF of every interface.
show (ip \| ipv6) route [vrf (all \| <vrf>)] [<target...>] routes iosxr.show_route Routing table (RIB) with next-hops, distance/metric and flags.
show (ipv6 \| ip) interface brief [vrf (all \| <vrf>)] iosxr.show_ipv6_interface_brief IPv6 addresses per interface (show ipv6 interface brief).
show (ospf \| ospfv3) [<process>] [vrf (all \| <vrf>)] interface brief iosxr.show_ospf_interface_brief OSPF enabled interfaces with area, cost and state.
show (ospf \| ospfv3) [<process>] [vrf (all \| <vrf>)] neighbor ospf.neighbors iosxr.show_ospf_neighbor OSPF adjacencies with state, DR role, dead timer and uptime.
show [(ospf \| ospfv3)] [<process>] [vrf (all \| <vrf>)] neighbor [<interface>] [<neighbor>] ospf.neighbors iosxr.show_ospf_neighbor OSPF adjacencies with state, DR role, dead timer and uptime.
show arp [vrf (all \| <vrf>)] [<target>] [location <location>] [detail] arp iosxr.show_arp ARP table per node/VRF.
show bfd [(ipv4 \| ipv6 \| all)] session [(interface <interface> \| destination <dest>)] [(detail \| location <location>)] bfd.sessions iosxr.show_bfd_session BFD sessions: echo/async timers, state and hardware offload.
show bfd [(ipv4 \| ipv6 \| all)] sessions bfd.sessions iosxr.show_bfd_session BFD sessions: echo/async timers, state and hardware offload.
show bgp [instance (all \| <instance>)] [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| all)] [(unicast \| multicast \| labeled-unicast \| all)] [<prefix>] iosxr.show_bgp BGP table (status codes, next hop, metric, local-pref, weight, AS path, origin) or per-prefix path detail.
show bgp [instance (all \| <instance>)] [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| all)] [(unicast \| multicast \| labeled-unicast \| all)] neighbors <neighbor> (routes \| received routes \| received-routes \| dampened-routes \| flap-statistics) iosxr.show_bgp_neighbor_routes Routes received from a neighbor (accepted or pre-policy).
show bgp [instance (all \| <instance>)] [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| all)] [(unicast \| multicast \| labeled-unicast \| all)] neighbors <neighbor> advertised-routes [summary] iosxr.show_bgp_neighbor_advertised_routes Routes advertised to a neighbor: network, next hop, from, AS path, origin.
show bgp [instance (all \| <instance>)] [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| all)] [(unicast \| multicast \| labeled-unicast \| all)] rd <rd> [<prefix>] iosxr.show_bgp BGP table (status codes, next hop, metric, local-pref, weight, AS path, origin) or per-prefix path detail.
show bgp [instance (all \| <instance>)] [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| l2vpn \| all)] [(unicast \| multicast \| labeled-unicast \| all \| evpn \| vpls \| flowspec)] neighbors [<neighbor>] [detail] iosxr.show_bgp_neighbors Detailed BGP session information per neighbor.
show bgp [instance (all \| <instance>)] [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| l2vpn \| link-state \| all \| rt-filter)] [(unicast \| multicast \| labeled-unicast \| all \| evpn \| vpls \| flowspec \| mvpn \| link-state \| mdt \| rt-filter)] summary bgp.summary iosxr.show_bgp_summary BGP peers per instance / VRF / address family, flattened to one list.
show bgp summary bgp.summary iosxr.show_bgp_summary BGP peers per instance / VRF / address family, flattened to one list.
show bundle <bundle> lag iosxr.show_bundle Link bundles (LAG): status, bandwidth, LACP and member links.
show bundle [(bundle-ether \| bundle-ether \| be) <id>] lag iosxr.show_bundle Link bundles (LAG): status, bandwidth, LACP and member links.
show bundle brief iosxr.show_bundle_brief One line per bundle: state, LACP, BFD, link counts and bandwidth.
show cdp entry <entry> iosxr.show_cdp_neighbors_detail CDP neighbors with platform, addresses and software version.
show cdp neighbors [<interface>] lldp.neighbors iosxr.show_cdp_neighbors CDP neighbor table.
show cdp neighbors [<interface>] detail iosxr.show_cdp_neighbors_detail CDP neighbors with platform, addresses and software version.
show clock [detail] iosxr.show_clock Device clock.
show configuration [(running \| merge \| running-config)] [<section...>] config iosxr.show_running_config Running configuration as a nested tree (interface -> Gi0/0/0/0 -> ...).
show configuration commit list [<count>] [detail] iosxr.show_configuration_commit_list Commit history: id, user, line, client and timestamp.
show controllers <interface> optics iosxr.show_controllers_optics Transceiver state, DOM readings (per lane), thresholds, alarms and vendor details.
show controllers optics <port> [(brief \| detail)] iosxr.show_controllers_optics Transceiver state, DOM readings (per lane), thresholds, alarms and vendor details.
show evpn ethernet-segment [(interface <interface> \| esi <esi> \| carving)] [detail] iosxr.show_evpn_ethernet_segment EVPN ethernet segments: ESI, interface and next-hops.
show evpn evi [(vpn-id <evi> \| detail)] iosxr.show_evpn_evi EVPN instances with bridge domain and type.
show filesystem [location (all \| <location>)] iosxr.show_filesystem File systems per node: size, free, type, flags and prefixes.
show filesystem location all iosxr.show_filesystem File systems per node: size, free, type, flags and prefixes.
show hsrp (ipv4 \| ipv6) [brief] iosxr.show_hsrp HSRP groups: priority, preempt, state, active/standby/virtual addresses.
show hsrp [<interface>] [brief] iosxr.show_hsrp HSRP groups: priority, preempt, state, active/standby/virtual addresses.
show install [(active \| committed)] summary iosxr.show_install_active Active software packages per node.
show install active [summary] iosxr.show_install_active Active software packages per node.
show interface [<interface>] [detail] interfaces.detail iosxr.show_interfaces Detailed interface state, addressing, rates and counters.
show interface brief interfaces.brief iosxr.show_interfaces_brief One line per interface: state, encapsulation, MTU, bandwidth.
show interface description interfaces.description iosxr.show_interfaces_description Interface status and description.
show interface summary iosxr.show_interfaces_summary Interface counts per type (total/up/down/admin-down).
show interfaces [<interface>] [(detail \| accounting)] interfaces.detail iosxr.show_interfaces Detailed interface state, addressing, rates and counters.
show interfaces brief interfaces.brief iosxr.show_interfaces_brief One line per interface: state, encapsulation, MTU, bandwidth.
show interfaces description interfaces.description iosxr.show_interfaces_description Interface status and description.
show interfaces summary iosxr.show_interfaces_summary Interface counts per type (total/up/down/admin-down).
show interfaces summary brief interfaces.brief iosxr.show_interfaces_brief One line per interface: state, encapsulation, MTU, bandwidth.
show inventory [(all \| raw \| chassis \| location <location> \| details)] inventory iosxr.show_inventory Hardware inventory (NAME/DESCR/PID/VID/SN).
show ip bgp [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| vpnv4 \| vpnv6 \| all)] [(unicast \| multicast \| all)] summary bgp.summary iosxr.show_bgp_summary BGP peers per instance / VRF / address family, flattened to one list.
show ip bgp [vrf (all \| <vrf>)] [<prefix>] iosxr.show_bgp BGP table (status codes, next hop, metric, local-pref, weight, AS path, origin) or per-prefix path detail.
show ip bgp [vrf (all \| <vrf>)] neighbors [<neighbor>] iosxr.show_bgp_neighbors Detailed BGP session information per neighbor.
show ip interface [<interface>] iosxr.show_ipv4_interface Per-interface IPv4 configuration (addresses, MTU, ACLs, ICMP settings).
show ipv4 interface [<interface>] iosxr.show_ipv4_interface Per-interface IPv4 configuration (addresses, MTU, ACLs, ICMP settings).
show ipv4 interface brief summary interfaces.brief iosxr.show_ipv4_interface_brief IPv4 address, status and VRF of every interface.
show ipv4 vrf (all \| <vrf>) interface [<interface>] iosxr.show_ipv4_interface Per-interface IPv4 configuration (addresses, MTU, ACLs, ICMP settings).
show ipv6 neighbors [vrf (all \| <vrf>)] [<interface>] [(detail \| location <location>)] ipv6.neighbors iosxr.show_ipv6_neighbors IPv6 neighbor discovery cache.
show ipv6 vrf (all \| <vrf>) interface brief iosxr.show_ipv6_interface_brief IPv6 addresses per interface (show ipv6 interface brief).
show isis [instance <instance>] adjacency [(detail \| level-1 \| level-2 \| <interface>)] isis.adjacency iosxr.show_isis_adjacency IS-IS adjacencies per level.
show isis [instance <instance>] interface brief iosxr.show_isis_interface_brief IS-IS interfaces: adjacency counts per level, topologies, CLNS state, MTU and priority.
show isis [instance <instance>] neighbors [(detail \| summary \| <interface>)] isis.adjacency iosxr.show_isis_neighbors IS-IS neighbors with SNPA, hold time and circuit type.
show l2vpn bridge-domain [(bd-name <bd> \| group <group> \| interface <interface> \| neighbor <neighbor> [pw-id <pwid>])] [(detail \| private)] l2vpn.pseudowires iosxr.show_l2vpn_bridge_domain Bridge-domains with state, ACs, access/VFI pseudowires, PW class, labels, MTU and backup PW role.
show l2vpn bridge-domain [(group <group> \| bd-name <bd>)] brief iosxr.show_l2vpn_bridge_domain_brief Bridge domains with state and AC/PW/PBB/VNI up counts.
show l2vpn bridge-domain summary iosxr.show_l2vpn_bridge_domain_summary Bridge-domain, AC, PW counters.
show l2vpn forwarding bridge-domain [<bd>] mac-address [<mac>] [(detail \| hardware ingress \| hardware egress)] mac.table iosxr.show_l2vpn_forwarding_bridge_domain_mac_address L2VPN MAC table: address, type, learned-from (AC interface or PW neighbor/ID), line card and age.
show l2vpn forwarding bridge-domain [<bd>] mac-address [<mac>] [(detail \| hardware ingress \| hardware egress)] location <location> mac.table iosxr.show_l2vpn_forwarding_bridge_domain_mac_address L2VPN MAC table: address, type, learned-from (AC interface or PW neighbor/ID), line card and age.
show l2vpn xconnect [(group <group> [xc-name <xc>] \| interface <interface> \| neighbor <neighbor> [pw-id <pwid>] \| state <state>)] detail l2vpn.pseudowires iosxr.show_l2vpn_xconnect_detail Point-to-point cross-connects in detail: AC, primary and backup PWs, PW class, labels, MTU and status TLV.
show l2vpn xconnect [(group <group> \| interface <interface> \| state <state> \| pw-id <pwid>)] iosxr.show_l2vpn_xconnect Point-to-point cross-connects with segment states.
show l2vpn xconnect summary iosxr.show_l2vpn_xconnect_summary Cross-connect counters (up/down/unresolved).
show lacp [(<bundle> \| system-id \| counters)] lag iosxr.show_lacp LACP actor/partner state flags, port IDs, keys, system IDs and mux state per bundle member.
show lldp entry <entry> lldp.neighbors iosxr.show_lldp_neighbors_detail LLDP neighbors with chassis/port IDs, system description and management addresses.
show lldp neighbors [<interface>] lldp.neighbors iosxr.show_lldp_neighbors LLDP neighbor table.
show lldp neighbors [<interface>] detail lldp.neighbors iosxr.show_lldp_neighbors_detail LLDP neighbors with chassis/port IDs, system description and management addresses.
show logging [(start \| end) <when...>] iosxr.show_logging Syslog configuration counters and buffered log entries.
show logging [last <count>] iosxr.show_logging Syslog configuration counters and buffered log entries.
show memory summary [(location <location> \| detail)] iosxr.show_memory_summary Physical/application memory per node.
show memory-summary iosxr.show_memory_summary Physical/application memory per node.
show mpls forwarding [(labels <labels...> \| prefix <prefix> \| interface <interface> \| vrf <vrf> \| summary \| detail \| tunnels)] iosxr.show_mpls_forwarding Label forwarding table (LFIB).
show mpls interfaces [<interface>] [detail] iosxr.show_mpls_interfaces Interfaces enabled for LDP / TE / static MPLS.
show mpls ldp [vrf <vrf>] neighbor [<neighbor>] [detail] ldp.neighbors iosxr.show_mpls_ldp_neighbor LDP sessions in detail: TCP endpoints, state, discovery sources, bound addresses.
show mpls ldp [vrf <vrf>] neighbor brief ldp.neighbors iosxr.show_mpls_ldp_neighbor_brief LDP sessions: GR/NSR, uptime and discovery/address/label counts.
show mpls traffic-eng tunnels tabular iosxr.show_mpls_traffic_eng_tunnels_tabular RSVP-TE tunnels: LSP ID, endpoints, state, FRR state, role and path protection.
show ntp associations [detail] iosxr.show_ntp_associations NTP peers with stratum, reach, delay/offset/dispersion.
show ntp associations vrf <vrf> iosxr.show_ntp_associations NTP peers with stratum, reach, delay/offset/dispersion.
show ntp status iosxr.show_ntp_status NTP clock state, stratum, reference, offsets and delays.
show ospf [vrf (all \| <vrf>)] interface brief iosxr.show_ospf_interface_brief OSPF enabled interfaces with area, cost and state.
show ospf [vrf (all \| <vrf>)] neighbor ospf.neighbors iosxr.show_ospf_neighbor OSPF adjacencies with state, DR role, dead timer and uptime.
show pim [vrf (all \| <vrf>)] [(ipv4 \| ipv6)] neighbor [<interface>] iosxr.show_pim_neighbor PIM neighbors: interface, uptime, expiry, DR priority and capability flags.
show platform [(vm \| location <location>)] iosxr.show_platform Line cards, RPs, fans and PSUs with their state.
show platform summary location <location> iosxr.show_platform_summary_location Detailed per-node platform summary.
show platform summary location all iosxr.show_platform_summary_location Detailed per-node platform summary.
show processes cpu [(location <location> \| sorted \| summary)] cpu iosxr.show_processes_cpu CPU utilisation (1/5/15 minutes) and per-process usage.
show redundancy [(summary \| location <location>)] iosxr.show_redundancy_summary RP redundancy pairs and NSR readiness.
show route [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| afi-all)] [(unicast \| multicast \| safi-all)] [(connected \| local \| static \| bgp \| ospf \| isis \| rip \| eigrp \| application \| subscriber \| best-local \| longer-prefixes)] [<target...>] routes iosxr.show_route Routing table (RIB) with next-hops, distance/metric and flags.
show route [vrf (all \| <vrf>)] [(ipv4 \| ipv6 \| afi-all)] [(unicast \| multicast \| safi-all)] summary [detail] iosxr.show_route_summary Route counts per source (connected, static, bgp, ...).
show rsvp neighbors [detail] iosxr.show_rsvp_neighbors RSVP global neighbors and their interface neighbors.
show running-config [<section...>] config iosxr.show_running_config Running configuration as a nested tree (interface -> Gi0/0/0/0 -> ...).
show users iosxr.show_users Logged in users.
show version [brief] system.version iosxr.show_version Software version, platform, uptime and packages.
show vrf (all \| <vrf>) vrfs iosxr.show_vrf VRF list with RD and route-targets.
show vrf (all \| <vrf>) detail vrfs iosxr.show_vrf_detail VRFs with RD, interfaces and import/export route-targets per address family.
show vrrp (ipv4 \| ipv6) [brief] iosxr.show_vrrp VRRP groups: priority, preempt, state, master and virtual addresses.
show vrrp [<interface>] [brief] iosxr.show_vrrp VRRP groups: priority, preempt, state, master and virtual addresses.
show watchdog memory-state [location <location>] iosxr.show_watchdog_memory_state Physical/free memory and memory state per node.
show watchdog memory-state location all iosxr.show_watchdog_memory_state Physical/free memory and memory state per node.

Juniper Junos OS / Junos OS Evolved (junos)

Command Normalized model Parser Description
show (chassis \| system) alarms junos.show_chassis_alarms Active chassis or system alarms.
show (ospf \| ospf3) interface [<interface>] [(brief \| detail \| extensive)] [instance <instance>] junos.show_ospf_interface OSPF interfaces: state, area, DR/BDR and neighbor count.
show (ospf \| ospf3) interface [instance <instance>] [<interface>] [(brief \| detail \| extensive)] junos.show_ospf_interface OSPF interfaces: state, area, DR/BDR and neighbor count.
show (ospf \| ospf3) neighbor [<neighbor>] [(instance <instance> \| area <area> \| interface <interface>)] [(brief \| detail \| extensive)] ospf.neighbors junos.show_ospf_neighbor OSPF / OSPFv3 adjacencies.
show arp [(no-resolve \| expiration-time \| hostname <host> \| interface <interface> \| vpn <vpn>)] arp junos.show_arp ARP table.
show arp no-resolve [(interface <interface> \| vpn <vpn>)] arp junos.show_arp ARP table.
show bfd session [(address <address> \| brief \| detail \| extensive \| summary)] bfd.sessions junos.show_bfd_session BFD sessions with detect time, transmit interval and multiplier.
show bgp group [<args...>] junos.show_bgp_group BGP groups: type, AS, local AS, flags, export/import policies, peer counts, peers and per-table path counts.
show bgp neighbor [<neighbor>] [(instance <instance> \| exact-instance <instance>)] junos.show_bgp_neighbor Detailed BGP peer information: group, state, options, NLRI, per-table prefix counts.
show bgp neighbor instance <instance> [<neighbor>] junos.show_bgp_neighbor Detailed BGP peer information: group, state, options, NLRI, per-table prefix counts.
show bgp summary (instance <instance> \| group <group>) bgp.summary junos.show_bgp_summary BGP peers with state, flaps, uptime and per-table prefix counters.
show bgp summary [(instance <instance> \| group <group> \| logical-system <ls>)] bgp.summary junos.show_bgp_summary BGP peers with state, flaps, uptime and per-table prefix counters.
show chassis cluster interfaces junos.show_chassis_cluster_interfaces SRX cluster control/fabric links and redundant-ethernet interfaces.
show chassis cluster status [redundancy-group <rg>] junos.show_chassis_cluster_status SRX cluster redundancy groups and node priorities/status.
show chassis environment [(<component> \| fpc \| routing-engine \| pem \| cb)] junos.show_chassis_environment Temperature, power and fan status per component.
show chassis firmware [(detail \| no-forwarding)] junos.show_chassis_firmware ROM / O/S firmware versions per component.
show chassis fpc [(<slot> \| pic-status \| detail)] junos.show_chassis_fpc FPC state, temperature, CPU and memory utilisation (or PIC status).
show chassis hardware [(detail \| extensive \| models \| clei-models)] [no-forwarding] inventory junos.show_chassis_hardware Hardware inventory as a component tree (chassis -> FPC -> PIC -> Xcvr).
show chassis routing-engine [<slot>] [(bios \| no-forwarding)] cpu junos.show_chassis_routing_engine Routing Engine state, CPU/memory utilisation, temperature and uptime.
show configuration [<section...>] config junos.show_configuration Configuration (curly-brace or | display set) as a nested tree.
show ethernet-switching interfaces [<interface>] [(brief \| detail)] junos.show_ethernet_switching_interfaces Switch ports: state, VLAN membership, tagging and blocking status.
show ethernet-switching table [(brief \| detail \| extensive \| vlan-name <vlan> \| interface <interface>)] mac.table junos.show_ethernet_switching_table MAC address table (ELS style).
show ethernet-switching table vlan-id <vlan> mac.table junos.show_ethernet_switching_table MAC address table (ELS style).
show firewall [(filter <filter> \| counter <counter...> \| log \| terse)] junos.show_firewall Firewall filter counters and policers (bytes/packets).
show interfaces (detail \| extensive \| statistics) [<interface>] interfaces.detail junos.show_interfaces Physical and logical interfaces: state, speed, MAC, counters, errors, families and addresses.
show interfaces [<interface>] [(detail \| extensive \| statistics \| brief \| media)] interfaces.detail junos.show_interfaces Physical and logical interfaces: state, speed, MAC, counters, errors, families and addresses.
show interfaces [<interface>] terse interfaces.brief junos.show_interfaces_terse Admin/link state and addresses per family for physical and logical interfaces.
show interfaces descriptions [<interface>] interfaces.description junos.show_interfaces_descriptions Interface admin/link state and description.
show interfaces diagnostics optics [<interface>] junos.show_interfaces_diagnostics_optics Optical transceiver DOM readings (Tx/Rx power, bias, temperature, voltage).
show interfaces terse [<interface>] interfaces.brief junos.show_interfaces_terse Admin/link state and addresses per family for physical and logical interfaces.
show interfaces terse routing-instance (all \| <instance>) interfaces.brief junos.show_interfaces_terse Admin/link state and addresses per family for physical and logical interfaces.
show ipv6 neighbors [<address>] ipv6.neighbors junos.show_ipv6_neighbors IPv6 neighbor cache.
show isis adjacency [<system>] [(brief \| detail \| extensive)] [instance <instance>] isis.adjacency junos.show_isis_adjacency IS-IS adjacencies per interface and level.
show l2circuit connections [<args...>] l2vpn.pseudowires junos.show_l2circuit_connections Layer-2 circuits per neighbor: status code (Up, HS hot-standby, MM, ...), labels, PW status TLV, flow labels.
show lacp interfaces [<interface>] [extensive] lag junos.show_lacp_interfaces LACP actor/partner state and mux state per aggregated Ethernet member.
show ldp neighbor [(detail \| extensive)] [instance <instance>] ldp.neighbors junos.show_ldp_neighbor LDP hello adjacencies.
show ldp session [<address>] [(brief \| detail \| extensive)] [instance <instance>] ldp.neighbors junos.show_ldp_session LDP sessions: state, connection, hold time, label advertisement mode.
show lldp neighbors lldp.neighbors junos.show_lldp_neighbors LLDP neighbor table.
show lldp neighbors detail lldp.neighbors junos.show_lldp_neighbors_interface LLDP neighbor detail (chassis/port IDs, system name/description, capabilities, management address).
show lldp neighbors interface <interface> lldp.neighbors junos.show_lldp_neighbors_interface LLDP neighbor detail (chassis/port IDs, system name/description, capabilities, management address).
show mpls lsp [(ingress \| egress \| transit \| up \| down \| brief \| detail \| extensive \| terse \| statistics)] [name <name>] junos.show_mpls_lsp MPLS LSPs grouped by ingress / egress / transit.
show mpls lsp name <name> [(detail \| extensive)] junos.show_mpls_lsp MPLS LSPs grouped by ingress / egress / transit.
show ntp associations [no-resolve] junos.show_ntp_associations NTP peers with stratum, reach, delay/offset/jitter.
show ntp status [no-resolve] junos.show_ntp_status NTP daemon variables (stratum, offset, jitter, reference, leap, sync state).
show route (advertising-protocol \| receive-protocol) bgp <neighbor> [<args...>] junos.show_route_advertised_received Routes advertised to / received from a BGP neighbor (prefix, next hop, MED, local-pref, AS path).
show route [<args...>] routes junos.show_route Route tables with every path (active flag, protocol, preference, metrics, AS path, next-hops, labels).
show route forwarding-table [<args...>] junos.show_route_forwarding_table Forwarding table (PFE view): destination, route type, next hop, next-hop type and index, outgoing interface.
show route forwarding-table summary [(family <family> \| table <table>)] junos.show_route_forwarding_table_summary Forwarding-table route counts per table and route type.
show route instance [<instance>] [(detail \| summary \| extensive)] vrfs junos.show_route_instance Routing instances (VRFs): type, state, RD, interfaces and tables.
show route summary [(table <table> \| instance <instance>)] junos.show_route_summary Route counts per table and protocol.
show rsvp interface [(detail \| extensive)] junos.show_rsvp_interface RSVP interfaces: state, reservations, bandwidth accounting.
show rsvp session [(ingress \| egress \| transit \| up \| down \| brief \| detail \| extensive)] [name <name>] junos.show_rsvp_session RSVP sessions grouped by ingress / egress / transit.
show running-config config junos.show_configuration Configuration (curly-brace or | display set) as a nested tree.
show security policies hit-count [(from-zone <from> to-zone <to> \| logical-system <ls>)] junos.show_security_policies_hit_count SRX security policy hit counters.
show system commit [(revision <rev> \| include <what>)] junos.show_system_commit Commit history.
show system information junos.show_system_information Model, family, Junos release and hostname.
show system processes [(summary \| brief \| extensive)] junos.show_system_processes_summary Process table (top style) with CPU/memory headline.
show system storage [(detail \| no-forwarding \| invoke-on all-routing-engines)] junos.show_system_storage Filesystem usage.
show system uptime [(all-members \| invoke-on all-routing-engines \| no-forwarding)] junos.show_system_uptime Current time, boot/protocol start times, last commit and load averages.
show system users [no-resolve] junos.show_system_users Logged in users and system load.
show version (all-members \| local \| member <member>) system.version junos.show_version Hostname, model, Junos release and installed packages (per member/RE).
show version [(detail \| brief)] [invoke-on (all-routing-engines \| other-routing-engine)] system.version junos.show_version Hostname, model, Junos release and installed packages (per member/RE).
show vlans [<vlan>] [(brief \| detail \| extensive)] junos.show_vlans VLANs with tag, routing instance and member interfaces (* = active).
show vpls connections [<args...>] l2vpn.pseudowires junos.show_vpls_connections VPLS pseudowires per instance: neighbor, VPLS-id, status code, labels and local LSI interface.

Huawei VRP (NE/CX/AR/CE/S series) (vrp)

Command Normalized model Parser Description
dir [<path...>] vrp.dir Directory listing with totals.
display acl (all \| <acl> \| name <name>) vrp.display_acl ACLs with type, step and rules (action, match text, hit counter, description).
display acl ipv6 (all \| <acl>) vrp.display_acl ACLs with type, step and rules (action, match text, hit counter, description).
display alarm (active \| all \| history) [verbose] vrp.display_alarm_active Active / historical alarms.
display alarm urgent vrp.display_alarm_active Active / historical alarms.
display arp [(all \| brief \| dynamic \| static \| interface <interface> \| vpn-instance <vrf> \| slot <slot>)] arp vrp.display_arp ARP table (with VLAN/CE-VLAN and VPN instance).
display arp all [vpn-instance <vrf>] arp vrp.display_arp ARP table (with VLAN/CE-VLAN and VPN instance).
display bfd session bfd.sessions vrp.display_bfd_session BFD sessions: discriminators, peer, state, type and interface.
display bfd session (all \| static \| dynamic \| discriminator <disc> \| peer-ip <ip> \| mpls-te <te...>) [verbose] bfd.sessions vrp.display_bfd_session BFD sessions: discriminators, peer, state, type and interface.
display bgp [(ipv6 \| vpnv4 \| vpnv6 \| evpn \| l2vpn-ad \| flow \| labeled \| multicast)] [(all \| vpn-instance <vrf>)] peer [<neighbor>] bgp.summary vrp.display_bgp_peer BGP peers: version, AS, messages, up/down time, state and prefixes received.
display bgp [(ipv6 \| vpnv4 \| vpnv6 \| evpn)] [(all \| vpn-instance <vrf>)] peer <neighbor> verbose vrp.display_bgp_peer_verbose Detailed BGP peer information.
display bgp [(vpnv4 \| ipv6 \| evpn)] [(all \| vpn-instance <vrf>)] routing-table [<target...>] vrp.display_bgp_routing_table BGP RIB: status codes, network, next hop, MED, local-pref, preferred value and AS path.
display bgp instance <instance> peer bgp.summary vrp.display_bgp_peer BGP peers: version, AS, messages, up/down time, state and prefixes received.
display bgp peer verbose vrp.display_bgp_peer_verbose Detailed BGP peer information.
display bgp vpnv4 vpn-instance <vrf> peer bgp.summary vrp.display_bgp_peer BGP peers: version, AS, messages, up/down time, state and prefixes received.
display bridge-domain [<bd>] [(verbose \| brief)] vrp.display_bridge_domain Bridge-domains: state, MAC learning, statistics, BC/MC/UC forwarding, split-horizon, bound VSI and interfaces.
display clock [utc] vrp.display_clock Device date, time, weekday and time zone.
display configuration [<section...>] config vrp.display_current_configuration Configuration as a nested tree (interface -> GigabitEthernet0/0/1 -> ...).
display cpu [(slot <slot>)] cpu vrp.display_cpu_usage CPU utilisation (current, 5 s / 1 min / 5 min, max) and top tasks.
display cpu-usage [(slot <slot> \| history \| configuration)] cpu vrp.display_cpu_usage CPU utilisation (current, 5 s / 1 min / 5 min, max) and top tasks.
display current-configuration [<section...>] config vrp.display_current_configuration Configuration as a nested tree (interface -> GigabitEthernet0/0/1 -> ...).
display device [(slot <slot> \| pic-status \| elabel \| manufacture-info)] vrp.display_device Boards, power supplies and fans with online/registration/alarm status.
display environment vrp.display_temperature Board temperature sensors with thresholds.
display esn vrp.display_esn Equipment serial number(s).
display eth-trunk [<trunk>] [(verbose \| brief)] lag vrp.display_eth_trunk Eth-Trunk (LAG) mode, status, hashing and member/partner ports.
display fan [(slot <slot> \| verbose)] vrp.display_fan Fan modules: presence, status, speed, mode and air flow (header-driven, any product layout).
display interface <type> <number> interfaces.detail vrp.display_interface Detailed interface state, addressing, rates, counters and errors.
display interface <type> brief interfaces.brief vrp.display_interface_brief Physical/protocol state, utilisation and error counters (Eth-Trunk members nested).
display interface [<interface>] interfaces.detail vrp.display_interface Detailed interface state, addressing, rates, counters and errors.
display interface brief [(main \| <type>)] interfaces.brief vrp.display_interface_brief Physical/protocol state, utilisation and error counters (Eth-Trunk members nested).
display interface description [<interface>] interfaces.description vrp.display_interface_description Interface state and description.
display ip interface brief [(<type> \| vpn-instance <vrf>)] interfaces.brief vrp.display_ip_interface_brief IPv4 address, mask and state per interface.
display ip routing-table [(vpn-instance <vrf> \| all-vpn-instance)] [(protocol <protocol> \| verbose \| <target...>)] routes vrp.display_ip_routing_table IPv4/IPv6 routing table (brief or verbose) including ECMP next-hops.
display ip routing-table statistics [vpn-instance <vrf>] vrp.display_ip_routing_table_statistics Route counts per protocol (total/active/added/deleted/freed).
display ip vpn-instance [(verbose \| <vrf>)] vrfs vrp.display_ip_vpn_instance VPN instances (VRFs) with RD and address families.
display ip vpn-instance [<vrf>] interface vrp.display_ip_vpn_instance_interface Interfaces bound to each VPN instance.
display ip vpn-instance interface vrp.display_ip_vpn_instance_interface Interfaces bound to each VPN instance.
display ipv6 neighbors [(brief \| <interface> \| vpn-instance <vrf>)] ipv6.neighbors vrp.display_ipv6_neighbors IPv6 neighbor cache (block format).
display ipv6 routing-table [(vpn-instance <vrf> \| all-vpn-instance)] [(protocol <protocol> \| verbose \| <target...>)] routes vrp.display_ip_routing_table IPv4/IPv6 routing table (brief or verbose) including ECMP next-hops.
display isis [<process>] peer [(verbose \| brief)] isis.adjacency vrp.display_isis_peer IS-IS neighbors per process (wrapped system IDs are re-joined).
display isis peer [<process>] isis.adjacency vrp.display_isis_peer IS-IS neighbors per process (wrapped system IDs are re-joined).
display license [(verbose \| esn \| state \| resource usage)] vrp.display_license License file details, features and control items.
display license esn vrp.display_esn Equipment serial number(s).
display lldp neighbor <interface> lldp.neighbors vrp.display_lldp_neighbor LLDP neighbors in detail (chassis/port IDs, system name/description, capabilities, management address).
display lldp neighbor [interface <interface>] lldp.neighbors vrp.display_lldp_neighbor LLDP neighbors in detail (chassis/port IDs, system name/description, capabilities, management address).
display lldp neighbor brief lldp.neighbors vrp.display_lldp_neighbor_brief LLDP neighbors (one line each).
display mac-address [(dynamic \| static \| black-hole \| summary)] [(vlan <vlan> \| vsi <vsi> \| bridge-domain <bd> \| interface <interface> \| <mac>)] mac.table vrp.display_mac_address MAC address table.
display memory [(slot <slot>)] vrp.display_memory_usage Memory totals and utilisation.
display memory-usage [(slot <slot>)] vrp.display_memory_usage Memory totals and utilisation.
display module-information [(verbose \| next-startup)] vrp.display_module_information Installed modules (plug-ins) and per-board module processes.
display mpls l2vc [(brief \| interface <interface> \| vc-id <vcid> \| remote-info \| state (up \| down))] l2vpn.pseudowires vrp.display_mpls_l2vc LDP L2VCs (VLL): client interface, AC/VC state, VC ID and type, destination, labels, MTU and tunnel.
display mpls ldp peer [(all \| verbose \| <peer>)] vrp.display_mpls_ldp_peer LDP peers with transport address and discovery source.
display mpls ldp session [(all \| verbose \| <peer>)] [vpn-instance <vrf>] ldp.neighbors vrp.display_mpls_ldp_session LDP sessions: status, label advertisement mode, role, age and keepalives.
display mpls lsp [(protocol <protocol> \| verbose \| statistics \| <target...>)] vrp.display_mpls_lsp MPLS LSPs (FEC, in/out labels, interfaces) grouped by protocol.
display mpls te tunnel [(<tunnel> \| name <name> \| verbose \| statistics)] vrp.display_mpls_te_tunnel TE LSPs: ingress LSR, destination, LSP ID, labels, role and tunnel name.
display ntp sessions [verbose] vrp.display_ntp_sessions NTP peers: reference, stratum, reach, poll, offset, delay, dispersion.
display ntp status vrp.display_ntp_status NTP synchronisation state, stratum, reference and offsets.
display ntp-service sessions [verbose] vrp.display_ntp_sessions NTP peers: reference, stratum, reach, poll, offset, delay, dispersion.
display ntp-service status vrp.display_ntp_status NTP synchronisation state, stratum, reference and offsets.
display ospf [<process>] peer [(<interface> \| <neighbor>)] ospf.neighbors vrp.display_ospf_peer OSPF neighbors in detail: address, state, priority, DR/BDR, dead timer, uptime.
display ospf [<process>] peer brief ospf.neighbors vrp.display_ospf_peer_brief OSPF neighbors: area, interface, router ID, state.
display ospf [<process>] peer verbose ospf.neighbors vrp.display_ospf_peer OSPF neighbors in detail: address, state, priority, DR/BDR, dead timer, uptime.
display ospfv3 [<process>] peer brief ospf.neighbors vrp.display_ospf_peer_brief OSPF neighbors: area, interface, router ID, state.
display patch-information vrp.display_patch_information Installed patch package and state.
display port vlan [(active \| <interface>)] vrp.display_port_vlan Port link-type, PVID and allowed VLANs.
display power [(slot <slot> \| manage)] vrp.display_power Power modules: state, mode, voltage/current/power where printed.
display power-supply vrp.display_power Power modules: state, mode, voltage/current/power where printed.
display saved-configuration [<section...>] config vrp.display_current_configuration Configuration as a nested tree (interface -> GigabitEthernet0/0/1 -> ...).
display sn license vrp.display_esn Equipment serial number(s).
display startup vrp.display_startup Current and next-startup software, configuration, license and patch files.
display temperature [(all \| slot <slot>)] vrp.display_temperature Board temperature sensors with thresholds.
display this config vrp.display_current_configuration Configuration as a nested tree (interface -> GigabitEthernet0/0/1 -> ...).
display users [all] vrp.display_users Logged in users (+ marks the current session).
display version [slot <slot>] system.version vrp.display_version VRP version, product, patch, uptime and per-board hardware/firmware versions.
display vlan [(summary \| <vlan>)] vrp.display_vlan VLANs with type/status and tagged/untagged member ports (and their state).
display vlan brief vrp.display_vlan VLANs with type/status and tagged/untagged member ports (and their state).
display vrrp <interface> <vrid> [(brief \| verbose)] vrp.display_vrrp VRRP groups: VRID, state, interface, type and virtual IP (brief or verbose).
display vrrp [(brief \| verbose \| <interface> \| statistics)] vrp.display_vrrp VRRP groups: VRID, state, interface, type and virtual IP (brief or verbose).
display vsi [name <vsi>] [verbose] l2vpn.pseudowires vrp.display_vsi VSIs: summary table (signaling, encapsulation, MTU, state) or verbose peers, ACs and PW labels/state.
display vsi [name <vsi>] peer-info vrp.display_vsi_peer_info VSI peers: peer router ID, VC label, peer type, LDP session and tunnel, per VSI.
display vsi [name <vsi>] protect-group [<group>] l2vpn.pseudowires vrp.display_vsi_protect_group VSI PW protect-groups: protect mode, reroute policy, members with preference and active/inactive state.
display vsi verbose l2vpn.pseudowires vrp.display_vsi VSIs: summary table (signaling, encapsulation, MTU, state) or verbose peers, ACs and PW labels/state.